Live Webinar: From What Applies to What Gets Done – A Live Look at What’s New in Adherent. Save Your Spot.

13 min read
Blogs

RINA Key Takeaways: EU Batteries Regulation: Five Questions Industry Is Asking Ahead of 2027

Authors
A graphic titled 'EU BATTERIES REGULATION: Five Questions from Industry' shows a battery pack with a holographic interface displaying a QR code and sustainability icons, alongside a circular flow of icons for factory, delivery, maintenance, and recycling, with EU stars in the background.

Authored by Andrew O’Neill, Regulatory Specialist, Adherent


Following my recent presentation at the RINA Products in Compliance Conference on Industrial and Embedded Batteries in London, I had the opportunity to speak with professionals from across the battery industry about the practical implications of the EU: Batteries and Waste Regulation 2023/1542.

While the presentation focused on the regulatory framework and its upcoming obligations, some of the most valuable discussions took place afterwards. The questions raised highlighted an important distinction between the objectives of legislation and the challenges businesses encounter when implementing it.

The EU Batteries Regulation represents a significant step towards improving sustainability, transparency, circularity and resource efficiency. However, achieving these objectives requires more than setting regulatory deadlines. It requires a framework that industry can understand, implement and demonstrate compliance with.

Several recurring questions stood out during these conversations. I wanted to explore five of them in more detail, looking at what the Regulation currently requires, where additional clarity may be needed, and what practical steps businesses can take.

One of the questions raised concerned whether the administrative and technical burden associated with the Digital Battery Passport (DPP) is proportionate to the benefits it is intended to deliver.

Under Article 77 of Regulation (EU) 2023/1542, the Battery Passport becomes mandatory from 18 February 2027 for electric vehicle (EV) batteries, light means of transport (LMT) batteries, and industrial batteries with a capacity greater than 2 kWh.

An important clarification is that not every economic operator is individually responsible for creating a passport, and not every battery requires one.

The principal responsibility lies with the economic operator placing the finished battery on the EU market or putting it into service. This distinction is particularly important for manufacturers of complex products incorporating batteries supplied by third parties.

The European Commission has clarified that where a finished battery is supplied to a manufacturer and subsequently incorporated into a larger product without fundamentally changing the battery, responsibility for the Battery Passport will generally remain with the economic operator that originally placed the finished battery on the market. However, if an operator assembles components into a new finished battery, responsibility may transfer to that operator.

There is also proportionality within the information requirements themselves. Not all Battery Passport data fields apply to every battery category, and certain requirements, including carbon footprint, recycled content and due diligence information, have separate implementation dates.

Furthermore, the information is divided into different levels of accessibility. Some information is publicly available, while other information is restricted to regulatory authorities or parties with a legitimate interest. Nevertheless, proportionality remains an important consideration.

For a large EV battery manufacturer producing thousands of batteries annually, implementing a centralised information management system may offer significant long-term benefits. For a smaller manufacturer producing a limited number of highly specialised industrial batteries, the cost of establishing and maintaining equivalent infrastructure may represent a substantially greater burden relative to production volume.

The question for industry is therefore not simply whether the Battery Passport is justified, but whether its implementation can accommodate different manufacturing models without unnecessarily increasing costs.

My takeaway: Businesses should first establish whether their battery is within the scope of Article 77 of the Regulation, identify the responsible economic operator, and determine precisely which information requirements apply. A Battery Passport does not necessarily require every participant in the supply chain to develop a separate digital infrastructure.

One of the more technically interesting discussions concerned bespoke products where tamper resistance is essential to their intended function.

Certain products are intentionally designed to become inoperable or destroy sensitive internal components when unauthorised access is attempted. Such designs may be necessary to protect security functions, sensitive information, or other critical operating characteristics.

This raises an important question: how do battery removability and replaceability requirements apply when allowing access to the battery could undermine the purpose of the product itself?

Article 11 of the Batteries Regulation, applicable from 18 February 2027, generally requires portable batteries incorporated into products to be readily removable and replaceable by the end-user.

However, Article 11(3) provides an important exception where continuity of power supply and a permanent battery connection are necessary for user and product safety, or for data integrity in products whose main function is collecting and supplying data.

The European Commission’s updated July 2026 guidance provides examples of applications where data integrity or uninterrupted operation can justify an exception. These include certain memory-backup batteries, payment systems, safety-critical devices and equipment used in secure communications. For bespoke tamper-resistant equipment, this provides a potential basis for assessing whether an exception is applicable. However, a product being tamper-resistant does not automatically qualify it for a derogation. Manufacturers would need to demonstrate that the specific design and intended function satisfy the conditions established by the Regulation.

Another distinction is that requirements permitting replacement by an independent professional are different from a full exception to end-user replaceability. A product designed to resist unauthorised tampering may still need a safe and technically feasible replacement procedure for an independent professional if it relies on a professional-replacement derogation. This creates a practical engineering challenge. In some applications, battery accessibility may be incompatible with the product’s intended security architecture.

My takeaway: Manufacturers of bespoke or tamper-resistant products should undertake a documented technical assessment of the intended function, safety requirements and consequences of battery removal. Where existing derogations are insufficient, those findings may help support a case for further regulatory clarification or an additional product-specific derogation.

This was another significant concern raised during the conference.

The Battery Passport is intended to provide a harmonised digital record covering information relevant to a battery’s identification, performance, sustainability, repair and end-of-life management.

However, developing a functioning digital system requires more than knowing which information should ultimately be provided.

Businesses need to understand the technical architecture, data structures, interoperability requirements, access controls, responsibilities for updating information, and how the system should interact with existing product and supply-chain databases.

There has been meaningful progress. The European Commission’s Digital Product Passport Registry became operational on 20 July 2026. Commission Implementing Regulation (EU) 2026/1778 establishes the Registry arrangements, and six of the eight supporting DPP standards have already been cited in the Official Journal. The Commission has also published detailed guidance covering 71 Battery Passport data points, updated most recently on 19 October 2026, identifying their applicability to different battery categories.

Nevertheless, as of November 2026, some elements remain under development. In particular, the implementing act defining access to restricted Battery Passport information has not yet been finalised. This creates a difficult planning environment. Companies are expected to prepare for an obligation beginning on 18 February 2027, while certain aspects of the technical and administrative framework continue to evolve. The potential consequences include investment in systems that require subsequent modification, uncertainty over data-sharing arrangements, delayed supplier integration and additional compliance resources.

It would be inaccurate to suggest that no framework currently exists. However, there is a legitimate distinction between having the foundations of a regulatory framework and having all the technical details necessary for implementation. There is also an important distinction between regulatory ambition and implementation readiness. A fixed compliance deadline provides certainty about when an obligation begins. It does not necessarily provide businesses with sufficient certainty about how that obligation must be implemented.

My takeaway: Businesses should begin preparing using the existing Commission guidance and Registry testing environment, while keeping their technical systems sufficiently flexible to accommodate additional requirements. At the same time, continued engagement between regulators and industry is essential to ensure that outstanding technical specifications are finalised and communicated with adequate time for implementation.

A recurring theme throughout the discussions was whether the Regulation sufficiently recognises the diversity of battery applications.

Batteries are incorporated into a vast range of products, from everyday consumer electronics to highly specialised industrial, medical and safety-critical equipment. The principle of improving removability and replaceability is clear: extending product lifetimes and facilitating battery recovery can reduce waste and support circularity. However, the technical conditions under which batteries are used can vary considerably.

Article 11 recognises some of these differences through derogations allowing battery removal and replacement by independent professionals rather than end-users, alongside the exceptions for continuity of power supply and data integrity. Importantly, the regulatory framework has already evolved.

Commission Delegated Regulation (EU) 2026/1770, published on 22 October 2026 which enters into force on 11 November 2026, expands the categories eligible for professional-only battery replacement. The additional categories include certain wearable devices, rechargeable electric toys subject to specific safety conditions, wireless food thermometer probes, equipment used in potentially explosive atmospheres, on-body medicine delivery systems and certain agricultural and construction telematics devices. This development demonstrates that the Commission can respond to evidence identifying products for which general removability and replaceability obligations present safety concerns. Nevertheless, not every specialist application will necessarily fit within the existing categories.

For businesses manufacturing highly specialised equipment, the challenge may be demonstrating that a particular product presents a sufficiently distinct technical or safety case to justify different treatment. Article 11(4) provides a mechanism through which the Commission may adopt further derogations, subject to specific conditions relating to safety, technical developments and applicable product safety requirements. The Commission has indicated that it intends to repeat its evidence-gathering process for potential additional derogations.

My takeaway: Industry should not assume that existing derogations cover every technically challenging product. Where compliance could compromise safety or conflict with other EU product safety requirements, manufacturers and industry associations should document those conflicts and use the available regulatory consultation mechanisms to present evidence supporting further clarification or additional derogations.

Perhaps one of the most commercially challenging questions concerns supply-chain cooperation.

The Battery Passport depends on information that may originate from multiple participants across the supply chain.

Manufacturers may require technical specifications, material composition information, performance characteristics, dismantling instructions and other supporting data from suppliers. However, the economic operator responsible for the Battery Passport may not directly possess all this information. Article 77(4) places responsibility on the economic operator placing the battery on the market to ensure that the information contained in the passport is accurate, complete and up to date. It also allows that operator to authorise another operator in writing to carry out Battery Passport activities on its behalf. Importantly, such authorisation does not transfer ultimate legal responsibility.

This creates a practical issue: how can a manufacturer comply when a supplier refuses to provide information, cannot produce it in the required format, or considers it commercially sensitive? The Batteries Regulation does not provide a universal contractual right requiring every upstream supplier to disclose all requested commercial or technical information. The most practical solution is therefore to establish clear contractual arrangements and data-sharing requirements within the supply chain. Businesses should review their supplier agreements to identify which information is required, who is responsible for providing it, how it must be validated, and how changes to that information will be communicated.

Confidentiality is another important consideration. The Battery Passport is not intended to make all commercially sensitive information available to the general public. Article 77 and Annex XIII establish different access categories, recognising that some information should only be accessible to specified authorities or parties with a legitimate interest. This distinction may assist manufacturers when negotiating data-sharing arrangements with suppliers concerned about intellectual property or commercially sensitive information. There is also an important opportunity to standardise supplier information requests rather than allowing individual manufacturers to develop entirely different collection systems.

My takeaway: Businesses should engage suppliers early, establish clear data responsibilities, and incorporate relevant information-sharing requirements into procurement and supply agreements. Where suppliers cannot demonstrate that they will provide the necessary information, this should be treated as a supply-chain compliance risk rather than an issue deferred until the 2027 deadline.

My experience at RINA reinforced something that I believe is fundamental to effective product regulation.

Industry does not simply need to know what a regulation says. It needs to understand how those requirements apply to real products, real manufacturing processes and real supply chains.

The EU Batteries Regulation has clear objectives, including improving circularity, increasing transparency, encouraging responsible sourcing and reducing the environmental impact of batteries. However, delivering those objectives requires a practical balance between regulatory ambition, technical feasibility and economic proportionality.

The discussions at RINA demonstrated the value of direct engagement between regulatory specialists, manufacturers, engineers and other industry professionals.

They also highlighted the importance of continuing that engagement as the Regulation moves towards its next major implementation milestones in February 2027.

Not every regulatory challenge requires an exemption or a delayed deadline. Some can be resolved through clearer guidance, better supply-chain arrangements or improved technical implementation. Others may expose genuine gaps between regulatory requirements and the realities of particular products or manufacturing processes. Identifying that difference is important.

For me, one of the most valuable aspects of attending events such as RINA is the opportunity to hear these concerns directly from the people responsible for designing, manufacturing and placing products on the market. Those conversations help turn regulatory interpretation into practical solutions. And ultimately, that is what effective regulatory compliance should achieve.

“This blog reflects the regulatory framework and European Commission guidance available as of 10 November 2026. Application of individual obligations and derogations depends on the specific battery, product design and circumstances of placing on the market.”

See Adherent in Action

Discover how agentic AI is reshaping product compliance for global enterprises.

Authors

Andrew O'Neill

Regulatory Compliance Specialist

Global regulatory compliance for batteries and toys outside of Europe, interpreting and applying safety, chemical, labelling, sustainability, and market access requirements across North America, Asia, Latin America, Africa, and the Middle East.

An open and a closed digital playbook titled "The Ultimate Product Compliance Playbook" on a dark background, with a download icon.

The Ultimate Product Compliance Playbook

What the World’s Leading Product Organizations Have Figured Out About Product Compliance

Secret Link